version: bump version number.

pyasic/API/__init__.py

@@ -258,9 +258,12 @@ If you are sure you want to use this command please use API.send_command("{comma
                 return False, data["Msg"]
         else:
             # make sure the command succeeded
-            if type(data["STATUS"]) == str:
+            if isinstance(data["STATUS"], str):
                 if data["STATUS"] in ["RESTART"]:
                     return True, None
+            elif isinstance(data["STATUS"], dict):
+                if data["STATUS"].get("STATUS") in ["S", "I"]:
+                    return True, None
             elif data["STATUS"][0]["STATUS"] not in ("S", "I"):
                 # this is an error
                 if data["STATUS"][0]["STATUS"] not in ("S", "I"):

pyasic/data/error_codes/whatsminer.py

@@ -16,8 +16,6 @@
 
 from dataclasses import asdict, dataclass, field, fields
 
-C_N_CODES = ["52", "53", "54", "55", "56"]
-
 
 @dataclass
 class WhatsminerError:
@@ -37,10 +35,8 @@ class WhatsminerError:
 
     @property
     def error_message(self):  # noqa - Skip PyCharm inspection
-        if len(str(self.error_code)) > 3 and str(self.error_code)[:2] in C_N_CODES:
-            # 55 error code base has chip numbers, so the format is
-            # 55 -> board num len 1 -> chip num len 3
-            err_type = 55
+        if len(str(self.error_code)) == 6 and not str(self.error_code)[:1] == "1":
+            err_type = int(str(self.error_code)[:2])
             err_subtype = int(str(self.error_code)[2:3])
             err_value = int(str(self.error_code)[3:])
         else:
@@ -88,7 +84,9 @@ class WhatsminerError:
 
 ERROR_CODES = {
     1: {  # Fan error
-        0: {0: "Fan unknown."},
+        0: {
+            0: "Fan unknown.",
+        },
         1: {  # Fan speed error of 1000+
             0: "Intake fan speed error.",
             1: "Exhaust fan speed error.",
@@ -101,7 +99,9 @@ ERROR_CODES = {
             0: "Intake fan speed error.  Fan speed deviates by more than 3000.",
             1: "Exhaust fan speed error.  Fan speed deviates by more than 3000.",
         },
-        4: {0: "Fan speed too high."},  # High speed
+        4: {
+            0: "Fan speed too high.",
+        },  # High speed
     },
     2: {  # Power error
         0: {
@@ -126,6 +126,7 @@ ERROR_CODES = {
             6: "Power remained unchanged for a long time.",
             7: "Power set enable error.",
             8: "Power input voltage is lower than 230V for high power mode.",
+            9: "Power input current is incorrect.",
         },
         3: {
             3: "Power output high temperature protection error.",
@@ -159,6 +160,8 @@ ERROR_CODES = {
         6: {
             3: "Power communication warning.",
             4: "Power communication error.",
+            5: "Power unknown error.",
+            6: "Power unknown error.",
             7: "Power watchdog protection.",
             8: "Power output high current protection.",
             9: "Power input high current protection.",
@@ -170,57 +173,134 @@ ERROR_CODES = {
             3: "Power input too high warning.",
             4: "Power fan warning.",
             5: "Power high temperature warning.",
+            6: "Power unknown error.",
+            7: "Power unknown error.",
+            8: "Power unknown error.",
+            9: "Power unknown error.",
+        },
+        8: {
+            0: "Power unknown error.",
+            1: "Power vendor status 1 bit 0 error.",
+            2: "Power vendor status 1 bit 1 error.",
+            3: "Power vendor status 1 bit 2 error.",
+            4: "Power vendor status 1 bit 3 error.",
+            5: "Power vendor status 1 bit 4 error.",
+            6: "Power vendor status 1 bit 5 error.",
+            7: "Power vendor status 1 bit 6 error.",
+            8: "Power vendor status 1 bit 7 error.",
+            9: "Power vendor status 2 bit 0 error.",
+        },
+        9: {
+            0: "Power vendor status 2 bit 1 error.",
+            1: "Power vendor status 2 bit 2 error.",
+            2: "Power vendor status 2 bit 3 error.",
+            3: "Power vendor status 2 bit 4 error.",
+            4: "Power vendor status 2 bit 5 error.",
+            5: "Power vendor status 2 bit 6 error.",
+            6: "Power vendor status 2 bit 7 error.",
         },
     },
     3: {  # temperature error
         0: {  # sensor detection error
-            "n": "Slot {n} temperature sensor detection error."
+            "n": "Slot {n} temperature sensor detection error.",
         },
         2: {  # temperature reading error
             "n": "Slot {n} temperature reading error.",
             9: "Control board temperature sensor communication error.",
         },
-        5: {"n": "Slot {n} temperature protecting."},  # temperature protection
-        6: {0: "Hashboard high temperature error."},  # high temp
+        5: {
+            "n": "Slot {n} temperature protecting.",
+        },  # temperature protection
+        6: {
+            0: "Hashboard high temperature error.",
+            1: "Hashboard high temperature error.",
+            2: "Hashboard high temperature error.",
+            3: "Hashboard high temperature error.",
+        },  # high temp
+        7: {
+            0: "The environment temperature fluctuates too much.",
+        },  # env temp
         8: {
             0: "Humidity sensor not found.",
             1: "Humidity sensor read error.",
             2: "Humidity sensor read error.",
             3: "Humidity sensor protecting.",
-        },
+        },  # humidity
     },
     4: {  # EEPROM error
-        0: {0: "Eeprom unknown error."},
-        1: {"n": "Slot {n} eeprom detection error."},  # EEPROM detection error
-        2: {"n": "Slot {n} eeprom parsing error."},  # EEPROM parsing error
-        3: {"n": "Slot {n} chip bin type error."},  # chip bin error
-        4: {"n": "Slot {n} eeprom chip number X error."},  # EEPROM chip number error
-        5: {"n": "Slot {n} eeprom xfer error."},  # EEPROM xfer error
+        0: {
+            0: "Eeprom unknown error.",
+        },
+        1: {
+            "n": "Slot {n} eeprom detection error.",
+        },  # EEPROM detection error
+        2: {
+            "n": "Slot {n} eeprom parsing error.",
+        },  # EEPROM parsing error
+        3: {
+            "n": "Slot {n} chip bin type error.",
+        },  # chip bin error
+        4: {
+            "n": "Slot {n} eeprom chip number X error.",
+        },  # EEPROM chip number error
+        5: {
+            "n": "Slot {n} eeprom xfer error.",
+        },  # EEPROM xfer error
     },
     5: {  # hashboard error
-        0: {0: "Board unknown error."},
-        1: {"n": "Slot {n} miner type error."},  # board miner type error
-        2: {"n": "Slot {n} bin type error."},  # chip bin type error
-        3: {"n": "Slot {n} not found."},  # board not found error
-        4: {"n": "Slot {n} error reading chip id."},  # reading chip id error
-        5: {"n": "Slot {n} has bad chips."},  # board has bad chips error
-        6: {"n": "Slot {n} loss of balance error."},  # loss of balance error
-        7: {"n": "Slot {n} xfer error chip."},  # xfer error
-        8: {"n": "Slot {n} reset error."},  # reset error
-        9: {"n": "Slot {n} frequency too low."},  # freq error
+        0: {
+            0: "Board unknown error.",
+        },
+        1: {
+            "n": "Slot {n} miner type error.",
+        },  # board miner type error
+        2: {
+            "n": "Slot {n} bin type error.",
+        },  # chip bin type error
+        3: {
+            "n": "Slot {n} not found.",
+        },  # board not found error
+        4: {
+            "n": "Slot {n} error reading chip id.",
+        },  # reading chip id error
+        5: {
+            "n": "Slot {n} has bad chips.",
+        },  # board has bad chips error
+        6: {
+            "n": "Slot {n} loss of balance error.",
+        },  # loss of balance error
+        7: {
+            "n": "Slot {n} xfer error chip.",
+        },  # xfer error
+        8: {
+            "n": "Slot {n} reset error.",
+        },  # reset error
+        9: {
+            "n": "Slot {n} frequency too low.",
+        },  # freq error
     },
     6: {  # env temp error
-        0: {0: "Environment temperature is too high."},  # normal env temp error
+        0: {
+            0: "Environment temperature is too high.",
+        },  # normal env temp error
         1: {  # high power env temp error
-            0: "Environment temperature is too high for high performance mode."
+            0: "Environment temperature is too high for high performance mode.",
         },
     },
     7: {  # control board error
-        0: {0: "MAC address invalid", 1: "Control board no support chip."},
+        0: {
+            0: "MAC address invalid",
+            1: "Control board no support chip.",
+        },
         1: {
             0: "Control board rebooted as an exception.",
             1: "Control board rebooted as exception and cpufreq reduced, please upgrade the firmware",
             2: "Control board rebooted as an exception.",
+            3: "The network is unstable, change time.",
+            4: "Unknown error.",
+        },
+        2: {
+            "n": "Control board slot {n} frame error.",
         },
     },
     8: {  # checksum error
@@ -228,63 +308,152 @@ ERROR_CODES = {
             0: "CGMiner checksum error.",
             1: "System monitor checksum error.",
             2: "Remote daemon checksum error.",
-        }
+        },
+        1: {0: "Air to liquid PCB serial # does not match."},
     },
-    9: {0: {1: "Power rate error."}},  # power rate error
+    9: {
+        0: {0: "Unknown error.", 1: "Power rate error.", 2: "Unknown error."}
+    },  # power rate error
     20: {  # pool error
-        1: {0: "All pools are disabled."},  # all disabled error
-        2: {"n": "Pool {n} connection failed."},  # pool connection failed error
-        3: {0: "High rejection rate on pool."},  # rejection rate error
+        0: {
+            0: "No pool information configured.",
+        },
+        1: {
+            0: "All pools are disabled.",
+        },  # all disabled error
+        2: {
+            "n": "Pool {n} connection failed.",
+        },  # pool connection failed error
+        3: {
+            0: "High rejection rate on pool.",
+        },  # rejection rate error
         4: {  # asicboost not supported error
-            0: "The pool does not support asicboost mode."
+            0: "The pool does not support asicboost mode.",
         },
     },
-    21: {1: {"n": "Slot {n} factory test step failed."}},
+    21: {
+        1: {
+            "n": "Slot {n} factory test step failed.",
+        }
+    },
     23: {  # hashrate error
-        1: {0: "Hashrate is too low."},
-        2: {0: "Hashrate is too low."},
-        3: {0: "Hashrate loss is too high."},
-        4: {0: "Hashrate loss is too high."},
-        5: {0: "Hashrate loss."},
+        1: {
+            0: "Hashrate is too low.",
+        },
+        2: {
+            0: "Hashrate is too low.",
+        },
+        3: {
+            0: "Hashrate loss is too high.",
+        },
+        4: {
+            0: "Hashrate loss is too high.",
+        },
+        5: {
+            0: "Hashrate loss.",
+        },
     },
     50: {  # water velocity error/voltage error
-        1: {"n": "Slot {n} chip voltage too low."},
-        2: {"n": "Slot {n} chip voltage changed."},
-        3: {"n": "Slot {n} chip temperature difference is too large."},
-        4: {"n": "Slot {n} chip hottest temperature difference is too large."},
-        7: {"n": "Slot {n} water velocity is abnormal."},  # abnormal water velocity
-        8: {0: "Chip temp calibration failed, please restore factory settings."},
-        9: {"n": "Slot {n} chip temp calibration check no balance."},
+        1: {
+            "n": "Slot {n} chip voltage too low.",
+        },
+        2: {
+            "n": "Slot {n} chip voltage changed.",
+        },
+        3: {
+            "n": "Slot {n} chip temperature difference is too large.",
+        },
+        4: {
+            "n": "Slot {n} chip hottest temperature difference is too large.",
+        },
+        5: {"n": "Slot {n} stopped hashing, chips temperature protecting."},
+        7: {
+            "n": "Slot {n} water velocity is abnormal.",
+        },  # abnormal water velocity
+        8: {
+            0: "Chip temp calibration failed, please restore factory settings.",
+        },
+        9: {
+            "n": "Slot {n} chip temp calibration check no balance.",
+        },
     },
     51: {  # frequency error
-        1: {"n": "Slot {n} frequency up timeout."},  # frequency up timeout
-        7: {"n": "Slot {n} frequency up timeout."},  # frequency up timeout
+        1: {
+            "n": "Slot {n} frequency up timeout.",
+        },  # frequency up timeout
+        2: {"n": "Slot {n} too many CRC errors."},
+        3: {"n": "Slot {n} unstable."},
+        7: {
+            "n": "Slot {n} frequency up timeout.",
+        },  # frequency up timeout
+    },
+    52: {
+        "n": {
+            "c": "Slot {n} chip {c} error nonce.",
+        },
+    },
+    53: {
+        "n": {
+            "c": "Slot {n} chip {c} too few nonce.",
+        },
+    },
+    54: {
+        "n": {
+            "c": "Slot {n} chip {c} temp protected.",
+        },
+    },
+    55: {
+        "n": {
+            "c": "Slot {n} chip {c} has been reset.",
+        },
+    },
+    56: {
+        "n": {
+            "c": "Slot {n} chip {c} zero nonce.",
+        },
     },
-    52: {"n": {"c": "Slot {n} chip {c} error nonce."}},
-    53: {"n": {"c": "Slot {n} chip {c} too few nonce."}},
-    54: {"n": {"c": "Slot {n} chip {c} temp protected."}},
-    55: {"n": {"c": "Slot {n} chip {c} has been reset."}},
-    56: {"n": {"c": "Slot {n} chip {c} does not return to the nonce."}},
     80: {
-        0: {0: "The tool version is too low, please update."},
-        1: {0: "Low freq."},
-        2: {0: "Low hashrate."},
-        3: {5: "High env temp."},
+        0: {
+            0: "The tool version is too low, please update.",
+        },
+        1: {
+            0: "Low freq.",
+        },
+        2: {
+            0: "Low hashrate.",
+        },
+        3: {
+            5: "High env temp.",
+        },
     },
     81: {
-        0: {0: "Chip data error."},
+        0: {
+            0: "Chip data error.",
+        },
     },
     82: {
-        0: {0: "Power version error."},
-        1: {0: "Miner type error."},
-        2: {0: "Version info error."},
+        0: {
+            0: "Power version error.",
+        },
+        1: {
+            0: "Miner type error.",
+        },
+        2: {
+            0: "Version info error.",
+        },
     },
     83: {
-        0: {0: "Empty level error."},
+        0: {
+            0: "Empty level error.",
+        },
     },
     84: {
-        0: {0: "Old firmware."},
-        1: {0: "Software version error."},
+        0: {
+            0: "Old firmware.",
+        },
+        1: {
+            0: "Software version error.",
+        },
     },
     85: {
         "n": {
@@ -296,8 +465,12 @@ ERROR_CODES = {
         },
     },
     86: {
-        0: {0: "Missing product serial #."},
-        1: {0: "Missing product type."},
+        0: {
+            0: "Missing product serial #.",
+        },
+        1: {
+            0: "Missing product type.",
+        },
         2: {
             0: "Missing miner serial #.",
             1: "Wrong miner serial # length.",
@@ -314,12 +487,34 @@ ERROR_CODES = {
             3: "Wrong power model rate.",
             4: "Wrong power model format.",
         },
-        5: {0: "Wrong hash board struct."},
-        6: {0: "Wrong miner cooling type."},
-        7: {0: "Missing PCB serial #."},
+        5: {
+            0: "Wrong hash board struct.",
+        },
+        6: {
+            0: "Wrong miner cooling type.",
+        },
+        7: {
+            0: "Missing PCB serial #.",
+        },
+    },
+    87: {
+        0: {
+            0: "Miner power mismatch.",
+        },
+    },
+    90: {
+        0: {
+            0: "Process error, exited with signal: 3.",
+        },
+        1: {
+            0: "Process error, exited with signal: 3.",
+        },
+    },
+    99: {
+        9: {
+            9: "Miner unknown error.",
+        },
     },
-    87: {0: {0: "Miner power mismatch."}},
-    99: {9: {9: "Miner unknown error."}},
     1000: {
         0: {
             0: "Security library error, please upgrade firmware",
@@ -328,7 +523,11 @@ ERROR_CODES = {
             3: "/antiv/dig/pf_partial.dig illegal.",
         },
     },
-    1001: {0: {0: "Security BTMiner removed, please upgrade firmware."}},
+    1001: {
+        0: {
+            0: "Security BTMiner removed, please upgrade firmware.",
+        },
+    },
     1100: {
         0: {
             0: "Security illegal file, please upgrade firmware.",

pyasic/miners/backends/cgminer_avalon.py

@@ -179,11 +179,12 @@ class CGMinerAvalon(CGMiner):
                 pass
 
     async def get_hostname(self, mac: str = None) -> Optional[str]:
-        if not mac:
-            mac = await self.get_mac()
-
-        if mac:
-            return f"Avalon{mac.replace(':', '')[-6:]}"
+        return None
+        # if not mac:
+        #     mac = await self.get_mac()
+        #
+        # if mac:
+        #     return f"Avalon{mac.replace(':', '')[-6:]}"
 
     async def get_hashrate(self, api_devs: dict = None) -> Optional[float]:
         if not api_devs:

pyasic/miners/backends/vnish.py

@@ -74,6 +74,24 @@ class VNish(BMMiner):
                 pass
         return False
 
+    async def stop_mining(self) -> bool:
+        data = await self.web.stop_mining()
+        if data:
+            try:
+                return data["success"]
+            except KeyError:
+                pass
+        return False
+
+    async def resume_mining(self) -> bool:
+        data = await self.web.resume_mining()
+        if data:
+            try:
+                return data["success"]
+            except KeyError:
+                pass
+        return False
+
     async def reboot(self) -> bool:
         data = await self.web.reboot()
         if data:

pyasic/miners/base.py

@@ -33,6 +33,8 @@ class BaseMiner(ABC):
         self.api = None
         self.web = None
 
+        self.ssh_pwd = "root"
+
         # static data
         self.ip = ip
         self.api_type = None
@@ -89,6 +91,7 @@ class BaseMiner(ABC):
 
     @pwd.setter
     def pwd(self, val):
+        self.ssh_pwd = val
         try:
             if self.web is not None:
                 self.web.pwd = val
@@ -125,7 +128,7 @@ class BaseMiner(ABC):
                 str(self.ip),
                 known_hosts=None,
                 username="root",
-                password="root",
+                password=self.ssh_pwd,
                 server_host_key_algs=["ssh-rsa"],
             )
             return conn
@@ -410,21 +413,29 @@ class BaseMiner(ABC):
         """
         pass
 
-    async def _get_data(self, allow_warning: bool, data_to_get: list = None) -> dict:
-        if not data_to_get:
+    async def _get_data(
+        self, allow_warning: bool, include: list = None, exclude: list = None
+    ) -> dict:
+        if include is None:
             # everything
-            data_to_get = list(self.data_locations.keys())
+            include = list(self.data_locations.keys())
+
+        if exclude is not None:
+            for item in exclude:
+                if item in include:
+                    include.remove(item)
 
         api_multicommand = set()
-        web_multicommand = set()
-        for data_name in data_to_get:
+        web_multicommand = []
+        for data_name in include:
             try:
                 fn_args = self.data_locations[data_name]["kwargs"]
                 for arg_name in fn_args:
                     if fn_args[arg_name].get("api"):
                         api_multicommand.add(fn_args[arg_name]["api"])
                     if fn_args[arg_name].get("web"):
-                        web_multicommand.add(fn_args[arg_name]["web"])
+                        if not fn_args[arg_name]["web"] in web_multicommand:
+                            web_multicommand.append(fn_args[arg_name]["web"])
             except KeyError as e:
                 logger.error(e, data_name)
                 continue
@@ -442,8 +453,6 @@ class BaseMiner(ABC):
         else:
             web_command_task = asyncio.sleep(0)
 
-        from datetime import datetime
-
         web_command_data = await web_command_task
         if web_command_data is None:
             web_command_data = {}
@@ -454,7 +463,7 @@ class BaseMiner(ABC):
 
         miner_data = {}
 
-        for data_name in data_to_get:
+        for data_name in include:
             try:
                 fn_args = self.data_locations[data_name]["kwargs"]
                 args_to_send = {k: None for k in fn_args}
@@ -508,13 +517,14 @@ class BaseMiner(ABC):
         return miner_data
 
     async def get_data(
-        self, allow_warning: bool = False, data_to_get: list = None
+        self, allow_warning: bool = False, include: list = None, exclude: list = None
     ) -> MinerData:
         """Get data from the miner in the form of [`MinerData`][pyasic.data.MinerData].
 
         Parameters:
             allow_warning: Allow warning when an API command fails.
-            data_to_get: Names of data items you want to gather. Defaults to all data.
+            include: Names of data items you want to gather. Defaults to all data.
+            exclude: Names of data items to exclude.  Exclusion happens after considering included items.
 
         Returns:
             A [`MinerData`][pyasic.data.MinerData] instance containing data from the miner.
@@ -530,7 +540,9 @@ class BaseMiner(ABC):
             ],
         )
 
-        gathered_data = await self._get_data(allow_warning, data_to_get=data_to_get)
+        gathered_data = await self._get_data(
+            allow_warning, include=include, exclude=exclude
+        )
         for item in gathered_data:
             if gathered_data[item] is not None:
                 setattr(data, item, gathered_data[item])

pyasic/miners/miner_factory.py

@@ -486,7 +486,7 @@ class MinerFactory:
             "location", ""
         ):
             return MinerTypes.WHATSMINER
-        if "Braiins OS" in web_text or 'href="/cgi-bin/luci"' in web_text:
+        if "Braiins OS" in web_text:
             return MinerTypes.BRAIINS_OS
         if "cloud-box" in web_text:
             return MinerTypes.GOLDSHELL
@@ -775,15 +775,13 @@ class MinerFactory:
                     f"http://{ip}/api/auth",
                     data={"username": "admin", "password": "admin"},
                 )
-                auth = (await auth_req.json())["jwt"]
+                auth = auth_req.json()["jwt"]
 
-                web_data = await (
-                    await session.post(
+                web_data = (await session.post(
                         f"http://{ip}/api/type",
                         headers={"Authorization": "Bearer " + auth},
                         data={},
-                    )
-                ).json()
+                    )).json()
                 return web_data["type"]
         except (httpx.HTTPError, LookupError):
             pass
@@ -806,7 +804,7 @@ class MinerFactory:
                     json={"query": "{bosminer {info{modelName}}}"},
                 )
             if d.status_code == 200:
-                json_data = await d.json()
+                json_data = d.json()
                 miner_model = json_data["data"]["bosminer"]["info"]["modelName"]
                 return miner_model
         except (httpx.HTTPError, LookupError):

pyasic/miners/types/whatsminer/M2X/M29.py

@@ -24,8 +24,5 @@ class M29V10(WhatsMiner):  # noqa - ignore ABC method implementation
         super().__init__(ip, api_ver)
         self.ip = ip
         self.model = "M29 V10"
-        self.nominal_chips = 0
-        warnings.warn(
-            "Unknown chip count for miner type M29V10, please open an issue on GitHub (https://github.com/UpstreamData/pyasic)."
-        )
+        self.nominal_chips = 50
         self.fan_count = 2

pyasic/miners/types/whatsminer/M3X/M30S_Plus.py

@@ -165,10 +165,7 @@ class M30SPlusVE50(WhatsMiner):  # noqa - ignore ABC method implementation
         super().__init__(ip, api_ver)
         self.ip = ip
         self.model = "M30S+ VE50"
-        self.nominal_chips = 0
-        warnings.warn(
-            "Unknown chip count for miner type M30S+ VE50, please open an issue on GitHub (https://github.com/UpstreamData/pyasic)."
-        )
+        self.nominal_chips = 164
         self.fan_count = 2
 
 

pyasic/web/__init__.py

@@ -24,7 +24,7 @@ from pyasic.errors import APIWarning
 class BaseWebAPI(ABC):
     def __init__(self, ip: str) -> None:
         # ip address of the miner
-        self.ip = ipaddress.ip_address(ip)
+        self.ip = ip # ipaddress.ip_address(ip)
         self.username = "root"
         self.pwd = "root"
 

pyasic/web/vnish.py

@@ -116,8 +116,32 @@ class VNishWebAPI(BaseWebAPI):
     async def reboot(self) -> dict:
         return await self.send_command("system/reboot", post=True)
 
+    async def pause_mining(self) -> dict:
+        return await self.send_command("mining/pause", post=True)
+
+    async def resume_mining(self) -> dict:
+        return await self.send_command("mining/resume", post=True)
+
+    async def stop_mining(self) -> dict:
+        return await self.send_command("mining/stop", post=True)
+
+    async def start_mining(self) -> dict:
+        return await self.send_command("mining/start", post=True)
+
     async def info(self):
         return await self.send_command("info")
 
     async def summary(self):
         return await self.send_command("summary")
+
+    async def chips(self):
+        return await self.send_command("chips")
+
+    async def layout(self):
+        return await self.send_command("layout")
+
+    async def status(self):
+        return await self.send_command("status")
+
+    async def settings(self):
+        return await self.send_command("settings")

pyproject.toml

@@ -1,6 +1,6 @@
 [tool.poetry]
 name = "pyasic"
-version = "0.37.3"
+version = "0.38.1"
 description = "A set of modules for interfacing with many common types of ASIC bitcoin miners, using both their API and SSH."
 authors = ["UpstreamData <brett@upstreamdata.ca>"]
 repository = "https://github.com/UpstreamData/pyasic"