version: bump version number.

pyasic/config/__init__.py

@@ -245,7 +245,9 @@ class MinerConfig:
         fan_speed: Manual fan speed to run the fan at (only if temp_mode == "manual").
         asicboost: Whether or not to enable asicboost.
         autotuning_enabled: Whether or not to enable autotuning.
+        autotuning_mode: Autotuning mode, either "wattage" or "hashrate".
         autotuning_wattage: The wattage to use when autotuning.
+        autotuning_hashrate: The hashrate to use when autotuning.
         dps_enabled: Whether or not to enable dynamic power scaling.
         dps_power_step: The amount of power to reduce autotuning by when the miner reaches dangerous temp.
         dps_min_power: The minimum power to reduce autotuning to.
@@ -266,7 +268,9 @@ class MinerConfig:
     asicboost: bool = None
 
     autotuning_enabled: bool = True
-    autotuning_wattage: int = 900
+    autotuning_mode: Literal["power", "hashrate"] = None
+    autotuning_wattage: int = None
+    autotuning_hashrate: int = None
 
     dps_enabled: bool = None
     dps_power_step: int = None
@@ -349,14 +353,20 @@ class MinerConfig:
                         self.autotuning_enabled = data[key][_key]
                     elif _key == "psu_power_limit":
                         self.autotuning_wattage = data[key][_key]
+                    elif _key == "power_target":
+                        self.autotuning_wattage = data[key][_key]
+                    elif _key == "hashrate_target":
+                        self.autotuning_hashrate = data[key][_key]
+                    elif _key == "mode":
+                        self.autotuning_mode = data[key][_key].replace("_target", "")
 
-            if key == "power_scaling":
+            if key in ["power_scaling", "performance_scaling"]:
                 for _key in data[key].keys():
                     if _key == "enabled":
                         self.dps_enabled = data[key][_key]
                     elif _key == "power_step":
                         self.dps_power_step = data[key][_key]
-                    elif _key == "min_psu_power_limit":
+                    elif _key in ["min_psu_power_limit", "min_power_target"]:
                         self.dps_min_power = data[key][_key]
                     elif _key == "shutdown_enabled":
                         self.dps_shutdown_enabled = data[key][_key]
@@ -482,7 +492,7 @@ class MinerConfig:
             "format": {
                 "version": "1.2+",
                 "model": f"Antminer {model}",
-                "generator": "Upstream Config Utility",
+                "generator": "pyasic",
                 "timestamp": int(time.time()),
             },
             "group": [
@@ -500,8 +510,16 @@ class MinerConfig:
             cfg["autotuning"] = {}
             if self.autotuning_enabled:
                 cfg["autotuning"]["enabled"] = self.autotuning_enabled
-            if self.autotuning_wattage:
-                cfg["autotuning"]["psu_power_limit"] = self.autotuning_wattage
+            if self.autotuning_mode:
+                cfg["format"]["version"] = "2.0"
+                cfg["autotuning"]["mode"] = self.autotuning_mode + "_target"
+                if self.autotuning_wattage:
+                    cfg["autotuning"]["power_target"] = self.autotuning_wattage
+                elif self.autotuning_hashrate:
+                    cfg["autotuning"]["hashrate_target"] = self.autotuning_hashrate
+            else:
+                if self.autotuning_wattage:
+                    cfg["autotuning"]["psu_power_limit"] = self.autotuning_wattage
 
         if self.asicboost:
             cfg["hash_chain_global"] = {}
@@ -525,7 +543,10 @@ class MinerConfig:
             if self.dps_power_step:
                 cfg["power_scaling"]["power_step"] = self.dps_power_step
             if self.dps_min_power:
-                cfg["power_scaling"]["min_psu_power_limit"] = self.dps_min_power
+                if cfg["format"]["version"] == "2.0":
+                    cfg["power_scaling"]["min_power_target"] = self.dps_min_power
+                else:
+                    cfg["power_scaling"]["min_psu_power_limit"] = self.dps_min_power
             if self.dps_shutdown_enabled:
                 cfg["power_scaling"]["shutdown_enabled"] = self.dps_shutdown_enabled
             if self.dps_shutdown_duration:

pyasic/miners/_backends/bosminer.py

@@ -198,11 +198,8 @@ class BOSMiner(BaseMiner):
                 return self.config
         if conn:
             async with conn:
-                logging.debug(f"{self}: Opening SFTP connection.")
-                async with conn.start_sftp_client() as sftp:
-                    logging.debug(f"{self}: Reading config file.")
-                    async with sftp.open("/etc/bosminer.toml") as file:
-                        toml_data = toml.loads(await file.read())
+                # good ol' BBB compatibility :/
+                toml_data = toml.loads((await conn.run("cat /etc/bosminer.toml")).stdout)
             logging.debug(f"{self}: Converting config file.")
             cfg = MinerConfig().from_raw(toml_data)
             self.config = cfg
@@ -219,14 +216,28 @@ class BOSMiner(BaseMiner):
         except (asyncssh.Error, OSError):
             return None
         async with conn:
-            await conn.run("/etc/init.d/bosminer stop")
-            logging.debug(f"{self}: Opening SFTP connection.")
-            async with conn.start_sftp_client() as sftp:
-                logging.debug(f"{self}: Opening config file.")
-                async with sftp.open("/etc/bosminer.toml", "w+") as file:
-                    await file.write(toml_conf)
-            logging.debug(f"{self}: Restarting BOSMiner")
-            await conn.run("/etc/init.d/bosminer start")
+            # BBB check because bitmain suxx
+            bbb_check = await conn.run("if [ ! -f /etc/init.d/bosminer ]; then echo '1'; else echo '0'; fi;")
+
+            bbb = bbb_check.stdout.strip() == "1"
+
+            if not bbb:
+                await conn.run("/etc/init.d/bosminer stop")
+                logging.debug(f"{self}: Opening SFTP connection.")
+                async with conn.start_sftp_client() as sftp:
+                    logging.debug(f"{self}: Opening config file.")
+                    async with sftp.open("/etc/bosminer.toml", "w+") as file:
+                        await file.write(toml_conf)
+                logging.debug(f"{self}: Restarting BOSMiner")
+                await conn.run("/etc/init.d/bosminer start")
+
+            # I really hate BBB, please get rid of it if you have it
+            else:
+                await conn.run("/etc/init.d/S99bosminer stop")
+                logging.debug(f"{self}: BBB sending config")
+                await conn.run("echo '" + toml_conf + "' > /etc/bosminer.toml")
+                logging.debug(f"{self}: BBB restarting bosminer.")
+                await conn.run("/etc/init.d/S99bosminer start")
 
     async def set_power_limit(self, wattage: int) -> bool:
         try:

pyasic/network/__init__.py

@@ -108,10 +108,6 @@ class MinerNetwork:
         # clear cached miners
         MinerFactory().clear_cached_miners()
 
-        # create a list of tasks and miner IPs
-        scan_tasks = []
-        miners = []
-
         limit = asyncio.Semaphore(PyasicSettings().network_scan_threads)
         miners = await asyncio.gather(
             *[self.ping_and_get_miner(host, limit) for host in local_network.hosts()]
@@ -140,8 +136,6 @@ class MinerNetwork:
         local_network = self.get_network()
 
         # create a list of scan tasks
-        scan_tasks = []
-
         limit = asyncio.Semaphore(PyasicSettings().network_scan_threads)
         miners = asyncio.as_completed(
             [
@@ -213,14 +207,13 @@ async def ping_miner(
         except asyncio.exceptions.TimeoutError:
             # ping failed if we time out
             continue
-        except ConnectionRefusedError:
+        except (ConnectionRefusedError, OSError):
             # handle for other connection errors
             logging.debug(f"{str(ip)}: Connection Refused.")
             raise ConnectionRefusedError
-        # ping failed, likely with an exception
         except Exception as e:
-            logging.warning(f"{str(ip)}: {e}")
-        continue
+            logging.warning(f"{str(ip)}: Ping And Get Miner Exception: {e}")
+            raise ConnectionRefusedError
     return
 
 
@@ -228,8 +221,8 @@ async def ping_and_get_miner(
     ip: ipaddress.ip_address, port=4028
 ) -> Union[None, AnyMiner]:
     for i in range(PyasicSettings().network_ping_retries):
-        connection_fut = asyncio.open_connection(str(ip), port)
         try:
+            connection_fut = asyncio.open_connection(str(ip), port)
             # get the read and write streams from the connection
             reader, writer = await asyncio.wait_for(
                 connection_fut, timeout=PyasicSettings().network_ping_timeout
@@ -243,13 +236,11 @@ async def ping_and_get_miner(
         except asyncio.exceptions.TimeoutError:
             # ping failed if we time out
             continue
-        except ConnectionRefusedError as e:
+        except (ConnectionRefusedError, OSError):
             # handle for other connection errors
             logging.debug(f"{str(ip)}: Connection Refused.")
-            raise e
-        # ping failed, likely with an exception
+            raise ConnectionRefusedError
         except Exception as e:
             logging.warning(f"{str(ip)}: Ping And Get Miner Exception: {e}")
-            raise e
-        continue
+            raise ConnectionRefusedError
     return

pyproject.toml

@@ -1,6 +1,6 @@
 [tool.poetry]
 name = "pyasic"
-version = "0.28.6"
+version = "0.29.1"
 description = "A set of modules for interfacing with many common types of ASIC bitcoin miners, using both their API and SSH."
 authors = ["UpstreamData <brett@upstreamdata.ca>"]
 repository = "https://github.com/UpstreamData/pyasic"