version: bump version number.

pyasic/API/bfgminer.py

@@ -0,0 +1,673 @@
+# ------------------------------------------------------------------------------
+#  Copyright 2022 Upstream Data Inc                                            -
+#                                                                              -
+#  Licensed under the Apache License, Version 2.0 (the "License");             -
+#  you may not use this file except in compliance with the License.            -
+#  You may obtain a copy of the License at                                     -
+#                                                                              -
+#      http://www.apache.org/licenses/LICENSE-2.0                              -
+#                                                                              -
+#  Unless required by applicable law or agreed to in writing, software         -
+#  distributed under the License is distributed on an "AS IS" BASIS,           -
+#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.    -
+#  See the License for the specific language governing permissions and         -
+#  limitations under the License.                                              -
+# ------------------------------------------------------------------------------
+
+import logging
+
+from pyasic.API import APIError, BaseMinerAPI
+
+
+class BFGMinerAPI(BaseMinerAPI):
+    """An abstraction of the BFGMiner API.
+
+    Each method corresponds to an API command in BFGMiner.
+
+    [BFGMiner API documentation](https://github.com/luke-jr/bfgminer/blob/bfgminer/README.RPC)
+
+    This class abstracts use of the BFGMiner API, as well as the
+    methods for sending commands to it.  The self.send_command()
+    function handles sending a command to the miner asynchronously, and
+    as such is the base for many of the functions in this class, which
+    rely on it to send the command for them.
+
+    Parameters:
+        ip: The IP of the miner to reference the API on.
+        port: The port to reference the API on.  Default is 4028.
+    """
+
+    def __init__(self, ip: str, api_ver: str = "0.0.0", port: int = 4028):
+        super().__init__(ip, port)
+        self.api_ver = api_ver
+
+    async def multicommand(self, *commands: str, allow_warning: bool = True) -> dict:
+        # make sure we can actually run each command, otherwise they will fail
+        commands = self._check_commands(*commands)
+        # standard multicommand format is "command1+command2"
+        # doesn't work for S19 which uses the backup _x19_multicommand
+        command = "+".join(commands)
+        try:
+            data = await self.send_command(command, allow_warning=allow_warning)
+        except APIError:
+            logging.debug(f"{self} - (Multicommand) - Handling X19 multicommand.")
+            data = await self._x19_multicommand(*command.split("+"))
+        return data
+
+    async def _x19_multicommand(self, *commands):
+        data = None
+        try:
+            data = {}
+            # send all commands individually
+            for cmd in commands:
+                data[cmd] = []
+                data[cmd].append(await self.send_command(cmd, allow_warning=True))
+        except APIError:
+            pass
+        except Exception as e:
+            logging.warning(
+                f"{self} - ([Hidden] X19 Multicommand) - API Command Error {e}"
+            )
+        return data
+
+    async def version(self) -> dict:
+        """Get miner version info.
+        <details>
+            <summary>Expand</summary>
+
+        Returns:
+            Miner version information.
+        </details>
+        """
+        return await self.send_command("version")
+
+    async def config(self) -> dict:
+        """Get some basic configuration info.
+        <details>
+            <summary>Expand</summary>
+
+        Returns:
+            ## Some miner configuration information:
+                * ASC Count <- the number of ASCs
+                * PGA Count <- the number of PGAs
+                * Pool Count <- the number of Pools
+                * Strategy <- the current pool strategy
+                * Log Interval <- the interval of logging
+                * Device Code <- list of compiled device drivers
+                * OS <- the current operating system
+                * Failover-Only <- failover-only setting
+                * Scan Time <- scan-time setting
+                * Queue <- queue setting
+                * Expiry <- expiry setting
+        </details>
+        """
+        return await self.send_command("config")
+
+    async def summary(self) -> dict:
+        """Get the status summary of the miner.
+        <details>
+            <summary>Expand</summary>
+
+        Returns:
+            The status summary of the miner.
+        </details>
+        """
+        return await self.send_command("summary")
+
+    async def pools(self) -> dict:
+        """Get pool information.
+        <details>
+            <summary>Expand</summary>
+
+        Returns:
+            Miner pool information.
+        </details>
+        """
+        return await self.send_command("pools")
+
+    async def devs(self) -> dict:
+        """Get data on each PGA/ASC with their details.
+        <details>
+            <summary>Expand</summary>
+
+        Returns:
+            Data on each PGA/ASC with their details.
+        </details>
+        """
+        return await self.send_command("devs")
+
+    async def procs(self) -> dict:
+        """Get data on each processor with their details.
+        <details>
+            <summary>Expand</summary>
+
+        Returns:
+            Data on each processor with their details.
+        </details>
+        """
+        return await self.send_command("procs")
+
+    async def devscan(self, info: str = "") -> dict:
+        """Get data on each processor with their details.
+        <details>
+            <summary>Expand</summary>
+
+        Parameters:
+            info: Info to scan for device by.
+
+        Returns:
+            Data on each processor with their details.
+        </details>
+        """
+        return await self.send_command("devscan", parameters=info)
+
+    async def pga(self, n: int) -> dict:
+        """Get data from PGA n.
+        <details>
+            <summary>Expand</summary>
+
+        Parameters:
+            n: The PGA number to get data from.
+
+        Returns:
+            Data on the PGA n.
+        </details>
+        """
+        return await self.send_command("pga", parameters=n)
+
+    async def proc(self, n: int = 0) -> dict:
+        """Get data processor n.
+        <details>
+            <summary>Expand</summary>
+
+        Parameters:
+            n: The processor to get data on.
+
+        Returns:
+            Data on processor n.
+        </details>
+        """
+        return await self.send_command("proc", parameters=n)
+
+    async def pgacount(self) -> dict:
+        """Get data fon all PGAs.
+        <details>
+            <summary>Expand</summary>
+
+        Returns:
+            Data on the PGAs connected.
+        </details>
+        """
+        return await self.send_command("pgacount")
+
+    async def proccount(self) -> dict:
+        """Get data fon all processors.
+        <details>
+            <summary>Expand</summary>
+
+        Returns:
+            Data on the processors connected.
+        </details>
+        """
+        return await self.send_command("proccount")
+
+    async def switchpool(self, n: int) -> dict:
+        """Switch pools to pool n.
+        <details>
+            <summary>Expand</summary>
+
+        Parameters:
+            n: The pool to switch to.
+
+        Returns:
+            A confirmation of switching to pool n.
+        </details>
+        """
+        return await self.send_command("switchpool", parameters=n)
+
+    async def enablepool(self, n: int) -> dict:
+        """Enable pool n.
+        <details>
+            <summary>Expand</summary>
+
+        Parameters:
+            n: The pool to enable.
+
+        Returns:
+            A confirmation of enabling pool n.
+        </details>
+        """
+        return await self.send_command("enablepool", parameters=n)
+
+    async def addpool(self, url: str, username: str, password: str) -> dict:
+        """Add a pool to the miner.
+        <details>
+            <summary>Expand</summary>
+
+        Parameters:
+            url: The URL of the new pool to add.
+            username: The users username on the new pool.
+            password: The worker password on the new pool.
+
+        Returns:
+            A confirmation of adding the pool.
+        </details>
+        """
+        return await self.send_command(
+            "addpool", parameters=f"{url},{username},{password}"
+        )
+
+    async def poolpriority(self, *n: int) -> dict:
+        """Set pool priority.
+        <details>
+            <summary>Expand</summary>
+
+        Parameters:
+            *n: Pools in order of priority.
+
+        Returns:
+            A confirmation of setting pool priority.
+        </details>
+        """
+        pools = f"{','.join([str(item) for item in n])}"
+        return await self.send_command("poolpriority", parameters=pools)
+
+    async def poolquota(self, n: int, q: int) -> dict:
+        """Set pool quota.
+        <details>
+            <summary>Expand</summary>
+
+        Parameters:
+            n: Pool number to set quota on.
+            q: Quota to set the pool to.
+
+        Returns:
+            A confirmation of setting pool quota.
+        </details>
+        """
+        return await self.send_command("poolquota", parameters=f"{n},{q}")
+
+    async def disablepool(self, n: int) -> dict:
+        """Disable a pool.
+        <details>
+            <summary>Expand</summary>
+
+        Parameters:
+            n: Pool to disable.
+
+        Returns:
+            A confirmation of diabling the pool.
+        </details>
+        """
+        return await self.send_command("disablepool", parameters=n)
+
+    async def removepool(self, n: int) -> dict:
+        """Remove a pool.
+        <details>
+            <summary>Expand</summary>
+
+        Parameters:
+            n: Pool to remove.
+
+        Returns:
+            A confirmation of removing the pool.
+        </details>
+        """
+        return await self.send_command("removepool", parameters=n)
+
+    async def save(self, filename: str = None) -> dict:
+        """Save the config.
+        <details>
+            <summary>Expand</summary>
+
+        Parameters:
+            filename: Filename to save the config as.
+
+        Returns:
+            A confirmation of saving the config.
+        </details>
+        """
+        if filename:
+            return await self.send_command("save", parameters=filename)
+        else:
+            return await self.send_command("save")
+
+    async def quit(self) -> dict:
+        """Quit CGMiner.
+        <details>
+            <summary>Expand</summary>
+
+        Returns:
+            A single "BYE" before CGMiner quits.
+        </details>
+        """
+        return await self.send_command("quit")
+
+    async def notify(self) -> dict:
+        """Notify the user of past errors.
+        <details>
+            <summary>Expand</summary>
+
+        Returns:
+            The last status and count of each devices problem(s).
+        </details>
+        """
+        return await self.send_command("notify")
+
+    async def privileged(self) -> dict:
+        """Check if you have privileged access.
+        <details>
+            <summary>Expand</summary>
+
+        Returns:
+            The STATUS section with an error if you have no privileged access, or success if you have privileged access.
+        </details>
+        """
+        return await self.send_command("privileged")
+
+    async def pgaenable(self, n: int) -> dict:
+        """Enable PGA n.
+        <details>
+            <summary>Expand</summary>
+
+        Parameters:
+            n: The PGA to enable.
+
+        Returns:
+            A confirmation of enabling PGA n.
+        </details>
+        """
+        return await self.send_command("pgaenable", parameters=n)
+
+    async def pgadisable(self, n: int) -> dict:
+        """Disable PGA n.
+        <details>
+            <summary>Expand</summary>
+
+        Parameters:
+            n: The PGA to disable.
+
+        Returns:
+            A confirmation of disabling PGA n.
+        </details>
+        """
+        return await self.send_command("pgadisable", parameters=n)
+
+    async def pgarestart(self, n: int) -> dict:
+        """Restart PGA n.
+        <details>
+            <summary>Expand</summary>
+
+        Parameters:
+            n: The PGA to restart.
+
+        Returns:
+            A confirmation of restarting PGA n.
+        </details>
+        """
+        return await self.send_command("pgadisable", parameters=n)
+
+    async def pgaidentify(self, n: int) -> dict:
+        """Identify PGA n.
+        <details>
+            <summary>Expand</summary>
+
+        Parameters:
+            n: The PGA to identify.
+
+        Returns:
+            A confirmation of identifying PGA n.
+        </details>
+        """
+        return await self.send_command("pgaidentify", parameters=n)
+
+    async def procenable(self, n: int) -> dict:
+        """Enable processor n.
+        <details>
+            <summary>Expand</summary>
+
+        Parameters:
+            n: The processor to enable.
+
+        Returns:
+            A confirmation of enabling processor n.
+        </details>
+        """
+        return await self.send_command("procenable", parameters=n)
+
+    async def procdisable(self, n: int) -> dict:
+        """Disable processor n.
+        <details>
+            <summary>Expand</summary>
+
+        Parameters:
+            n: The processor to disable.
+
+        Returns:
+            A confirmation of disabling processor n.
+        </details>
+        """
+        return await self.send_command("procdisable", parameters=n)
+
+    async def procrestart(self, n: int) -> dict:
+        """Restart processor n.
+        <details>
+            <summary>Expand</summary>
+
+        Parameters:
+            n: The processor to restart.
+
+        Returns:
+            A confirmation of restarting processor n.
+        </details>
+        """
+        return await self.send_command("procdisable", parameters=n)
+
+    async def procidentify(self, n: int) -> dict:
+        """Identify processor n.
+        <details>
+            <summary>Expand</summary>
+
+        Parameters:
+            n: The processor to identify.
+
+        Returns:
+            A confirmation of identifying processor n.
+        </details>
+        """
+        return await self.send_command("procidentify", parameters=n)
+
+    async def devdetails(self) -> dict:
+        """Get data on all devices with their static details.
+        <details>
+            <summary>Expand</summary>
+
+        Returns:
+            Data on all devices with their static details.
+        </details>
+        """
+        return await self.send_command("devdetails")
+
+    async def restart(self) -> dict:
+        """Restart CGMiner using the API.
+        <details>
+            <summary>Expand</summary>
+
+        Returns:
+            A reply informing of the restart.
+        </details>
+        """
+        return await self.send_command("restart")
+
+    async def stats(self) -> dict:
+        """Get stats of each device/pool with more than 1 getwork.
+        <details>
+            <summary>Expand</summary>
+
+        Returns:
+            Stats of each device/pool with more than 1 getwork.
+        </details>
+        """
+        return await self.send_command("stats")
+
+    async def check(self, command: str) -> dict:
+        """Check if the command command exists in CGMiner.
+        <details>
+            <summary>Expand</summary>
+
+        Parameters:
+            command: The command to check.
+
+        Returns:
+            ## Information about a command:
+                * Exists (Y/N) <- the command exists in this version
+                * Access (Y/N) <- you have access to use the command
+        </details>
+        """
+        return await self.send_command("check", parameters=command)
+
+    async def failover_only(self, failover: bool) -> dict:
+        """Set failover-only.
+        <details>
+            <summary>Expand</summary>
+
+        Parameters:
+            failover: What to set failover-only to.
+
+        Returns:
+            Confirmation of setting failover-only.
+        </details>
+        """
+        return await self.send_command("failover-only", parameters=failover)
+
+    async def coin(self) -> dict:
+        """Get information on the current coin.
+        <details>
+            <summary>Expand</summary>
+
+        Returns:
+            ## Information about the current coin being mined:
+                * Hash Method <- the hashing algorithm
+                * Current Block Time <- blocktime as a float, 0 means none
+                * Current Block Hash <- the hash of the current block, blank means none
+                * LP <- whether LP is in use on at least 1 pool
+                * Network Difficulty: the current network difficulty
+        </details>
+        """
+        return await self.send_command("coin")
+
+    async def debug(self, setting: str) -> dict:
+        """Set a debug setting.
+        <details>
+            <summary>Expand</summary>
+
+        Parameters:
+            setting: Which setting to switch to.
+                ## Options are:
+                    * Silent
+                    * Quiet
+                    * Verbose
+                    * Debug
+                    * RPCProto
+                    * PerDevice
+                    * WorkTime
+                    * Normal
+
+        Returns:
+            Data on which debug setting was enabled or disabled.
+        </details>
+        """
+        return await self.send_command("debug", parameters=setting)
+
+    async def setconfig(self, name: str, n: int) -> dict:
+        """Set config of name to value n.
+        <details>
+            <summary>Expand</summary>
+
+        Parameters:
+            name: The name of the config setting to set.
+                ## Options are:
+                    * queue
+                    * scantime
+                    * expiry
+            n: The value to set the 'name' setting to.
+
+        Returns:
+            The results of setting config of name to n.
+        </details>
+        """
+        return await self.send_command("setconfig", parameters=f"{name},{n}")
+
+    async def pgaset(self, n: int, opt: str, val: int = None) -> dict:
+        """Set PGA option opt to val on PGA n.
+        <details>
+            <summary>Expand</summary>
+
+        Options:
+        ```
+            MMQ -
+                opt: clock
+                val: 2 - 250 (multiple of 2)
+            XBS -
+                opt: clock
+                val: 2 - 250 (multiple of 2)
+        ```
+
+        Parameters:
+            n: The PGA to set the options on.
+            opt: The option to set. Setting this to 'help' returns a help message.
+            val: The value to set the option to.
+
+        Returns:
+            Confirmation of setting PGA n with opt[,val].
+        </details>
+        """
+        if val:
+            return await self.send_command("pgaset", parameters=f"{n},{opt},{val}")
+        else:
+            return await self.send_command("pgaset", parameters=f"{n},{opt}")
+
+    async def pprocset(self, n: int, opt: str, val: int = None) -> dict:
+        """Set processor option opt to val on processor n.
+        <details>
+            <summary>Expand</summary>
+
+        Options:
+        ```
+            MMQ -
+                opt: clock
+                val: 2 - 250 (multiple of 2)
+            XBS -
+                opt: clock
+                val: 2 - 250 (multiple of 2)
+        ```
+
+        Parameters:
+            n: The PGA to set the options on.
+            opt: The option to set. Setting this to 'help' returns a help message.
+            val: The value to set the option to.
+
+        Returns:
+            Confirmation of setting PGA n with opt[,val].
+        </details>
+        """
+        if val:
+            return await self.send_command("pgaset", parameters=f"{n},{opt},{val}")
+        else:
+            return await self.send_command("pgaset", parameters=f"{n},{opt}")
+
+    async def zero(self, which: str, summary: bool) -> dict:
+        """Zero a device.
+        <details>
+            <summary>Expand</summary>
+
+        Parameters:
+            which: Which device to zero. Setting this to 'all' zeros all devices. Setting this to 'bestshare' zeros only the bestshare values for each pool and global.
+            summary: Whether or not to show a full summary.
+
+
+        Returns:
+            the STATUS section with info on the zero and optional summary.
+        </details>
+        """
+        return await self.send_command("zero", parameters=f"{which},{summary}")

pyasic/API/btminer.py

@@ -767,7 +767,7 @@ class BTMinerAPI(BaseMinerAPI):
 
         """
         return await self.send_privileged_command(
-            "adjust_power_limit", power_limit=power_limit
+            "adjust_power_limit", power_limit=str(power_limit)
         )
 
     @api_min_version("2.0.5")

pyasic/config/__init__.py

@@ -91,8 +91,21 @@ class _Pool:
         pool = {"url": self.url, "user": username, "pass": self.password}
         return pool
 
-    def as_x15(self, user_suffix: str = None) -> dict:
+    def as_x17(self, user_suffix: str = None) -> dict:
-        """Convert the data in this class to a dict usable by an X19 device.
+        """Convert the data in this class to a dict usable by an X5 device.
+
+        Parameters:
+             user_suffix: The suffix to append to username.
+        """
+        username = self.username
+        if user_suffix:
+            username = f"{username}{user_suffix}"
+
+        pool = {"url": self.url, "user": username, "pass": self.password}
+        return pool
+
+    def as_goldshell(self, user_suffix: str = None) -> dict:
+        """Convert the data in this class to a dict usable by a goldshell device.
 
         Parameters:
              user_suffix: The suffix to append to username.
@@ -201,8 +214,9 @@ class _PoolGroup:
             pools.append(pool.as_x19(user_suffix=user_suffix))
         return pools
 
-    def as_x15(self, user_suffix: str = None) -> dict:
+
-        """Convert the data in this class to a list usable by an X15 device.
+    def as_x17(self, user_suffix: str = None) -> dict:
+        """Convert the data in this class to a list usable by an X5 device.
 
         Parameters:
              user_suffix: The suffix to append to username.
@@ -219,23 +233,37 @@ class _PoolGroup:
             "_ant_pool3pw": "",
         }
         for idx, pool in enumerate(self.pools[:3]):
-            pools[f"_ant_pool{idx+1}url"] = pool.as_x15(user_suffix=user_suffix)["url"]
+            pools[f"_ant_pool{idx+1}url"] = pool.as_x17(user_suffix=user_suffix)["url"]
-            pools[f"_ant_pool{idx+1}user"] = pool.as_x15(user_suffix=user_suffix)[
+            pools[f"_ant_pool{idx+1}user"] = pool.as_x17(user_suffix=user_suffix)["user"]
-                "user"
+            pools[f"_ant_pool{idx+1}pw"] = pool.as_x17(user_suffix=user_suffix)["pass"]
-            ]
-            pools[f"_ant_pool{idx+1}pw"] = pool.as_x15(user_suffix=user_suffix)[
-                "pass"
-            ]
 
         return pools
 
+    def as_goldshell(self, user_suffix: str = None) -> list:
+        """Convert the data in this class to a list usable by a goldshell device.
+
+        Parameters:
+             user_suffix: The suffix to append to username.
+        """
+        return [pool.as_goldshell(user_suffix=user_suffix) for pool in self.pools[:3]]
+
     def as_inno(self, user_suffix: str = None) -> dict:
         """Convert the data in this class to a list usable by an Innosilicon device.
 
         Parameters:
              user_suffix: The suffix to append to username.
         """
-        pools = {}
+        pools = {
+            "Pool1": None,
+            "UserName1": None,
+            "Password1": None,
+            "Pool2": None,
+            "UserName2": None,
+            "Password2": None,
+            "Pool3": None,
+            "UserName3": None,
+            "Password3": None,
+        }
         for idx, pool in enumerate(self.pools[:3]):
             pool_data = pool.as_inno(user_suffix=user_suffix)
             for key in pool_data:
@@ -366,6 +394,9 @@ class MinerConfig:
         """
         logging.debug(f"MinerConfig - (From Raw) - Loading raw config")
         pool_groups = []
+        if isinstance(data, list):
+            # goldshell config list
+            data = {"pools": data}
         for key in data.keys():
             if key == "pools":
                 pool_groups.append(_PoolGroup().from_dict({"pools": data[key]}))
@@ -457,8 +488,14 @@ class MinerConfig:
         for group in data["pool_groups"]:
             pool_groups.append(_PoolGroup().from_dict(group))
         for key in data:
-            if hasattr(self, key) and not key == "pool_groups":
+            if (
+                hasattr(self, key)
+                and not key == "pool_groups"
+                and not key == "miner_mode"
+            ):
                 setattr(self, key, data[key])
+            if key == "miner_mode":
+                self.miner_mode = X19PowerMode(data[key])
         self.pool_groups = pool_groups
         return self
 
@@ -523,13 +560,23 @@ class MinerConfig:
 
         return cfg
 
-    def as_x15(self, user_suffix: str = None) -> dict:
+    def as_x17(self, user_suffix: str = None) -> dict:
-        """Convert the data in this class to a config usable by an X15 device.
+        """Convert the data in this class to a config usable by an X5 device.
 
         Parameters:
             user_suffix: The suffix to append to username.
         """
-        cfg = self.pool_groups[0].as_x15(user_suffix=user_suffix)
+        cfg = self.pool_groups[0].as_x17(user_suffix=user_suffix)
+
+        return cfg
+
+    def as_goldshell(self, user_suffix: str = None) -> list:
+        """Convert the data in this class to a config usable by a goldshell device.
+
+        Parameters:
+            user_suffix: The suffix to append to username.
+        """
+        cfg = self.pool_groups[0].as_goldshell(user_suffix=user_suffix)
 
         return cfg
 

pyasic/data/__init__.py

@@ -259,8 +259,9 @@ class MinerData:
 
     @property
     def left_chips(self):  # noqa - Skip PyCharm inspection
-        if len(self.hashboards) in [2, 3]:
+        if len(self.hashboards) in [2, 3, 4]:
             return self.hashboards[0].chips
+
         return 0
 
     @left_chips.setter
@@ -271,7 +272,7 @@ class MinerData:
     def center_chips(self):  # noqa - Skip PyCharm inspection
         if len(self.hashboards) == 1:
             return self.hashboards[0].chips
-        if len(self.hashboards) == 3:
+        if len(self.hashboards) in [2, 3, 4]:
             return self.hashboards[1].chips
         return 0
 
@@ -285,6 +286,8 @@ class MinerData:
             return self.hashboards[1].chips
         if len(self.hashboards) == 3:
             return self.hashboards[2].chips
+        if len(self.hashboards) > 3:
+            return self.hashboards[-1:][0].chips
         return 0
 
     @right_chips.setter
@@ -293,7 +296,7 @@ class MinerData:
 
     @property
     def left_board_hashrate(self):  # noqa - Skip PyCharm inspection
-        if len(self.hashboards) in [2, 3]:
+        if len(self.hashboards) in [2, 3, 4]:
             return self.hashboards[0].hashrate
         return 0
 
@@ -305,7 +308,7 @@ class MinerData:
     def center_board_hashrate(self):  # noqa - Skip PyCharm inspection
         if len(self.hashboards) == 1:
             return self.hashboards[0].hashrate
-        if len(self.hashboards) == 3:
+        if len(self.hashboards) in [2, 3, 4]:
             return self.hashboards[1].hashrate
         return 0
 
@@ -319,6 +322,8 @@ class MinerData:
             return self.hashboards[1].hashrate
         if len(self.hashboards) == 3:
             return self.hashboards[2].hashrate
+        if len(self.hashboards) > 3:
+            return self.hashboards[-1:][0].hashrate
         return 0
 
     @right_board_hashrate.setter
@@ -327,7 +332,7 @@ class MinerData:
 
     @property
     def left_board_temp(self):  # noqa - Skip PyCharm inspection
-        if len(self.hashboards) in [2, 3]:
+        if len(self.hashboards) in [2, 3, 4]:
             return self.hashboards[0].temp
         return 0
 
@@ -339,7 +344,7 @@ class MinerData:
     def center_board_temp(self):  # noqa - Skip PyCharm inspection
         if len(self.hashboards) == 1:
             return self.hashboards[0].temp
-        if len(self.hashboards) == 3:
+        if len(self.hashboards) in [2, 3, 4]:
             return self.hashboards[1].temp
         return 0
 
@@ -353,6 +358,8 @@ class MinerData:
             return self.hashboards[1].temp
         if len(self.hashboards) == 3:
             return self.hashboards[2].temp
+        if len(self.hashboards) > 3:
+            return self.hashboards[-1:][0].temp
         return 0
 
     @right_board_temp.setter
@@ -361,7 +368,7 @@ class MinerData:
 
     @property
     def left_board_chip_temp(self):  # noqa - Skip PyCharm inspection
-        if len(self.hashboards) in [2, 3]:
+        if len(self.hashboards) in [2, 3, 4]:
             return self.hashboards[0].chip_temp
         return 0
 
@@ -373,7 +380,7 @@ class MinerData:
     def center_board_chip_temp(self):  # noqa - Skip PyCharm inspection
         if len(self.hashboards) == 1:
             return self.hashboards[0].chip_temp
-        if len(self.hashboards) == 3:
+        if len(self.hashboards) in [2, 3, 4]:
             return self.hashboards[1].chip_temp
         return 0
 
@@ -387,6 +394,8 @@ class MinerData:
             return self.hashboards[1].chip_temp
         if len(self.hashboards) == 3:
             return self.hashboards[2].chip_temp
+        if len(self.hashboards) > 3:
+            return self.hashboards[-1:][0].chip_temp
         return 0
 
     @right_board_chip_temp.setter

pyasic/load/__init__.py

@@ -19,12 +19,12 @@ from typing import List, Union
 
 from pyasic.errors import APIError
 from pyasic.miners import AnyMiner
-from pyasic.miners._backends import (  # noqa - Ignore access to _module
+from pyasic.miners.btc._backends import (  # noqa - Ignore access to _module
     X19,
     BOSMiner,
     BTMiner,
 )
-from pyasic.miners._types import (  # noqa - Ignore access to _module
+from pyasic.miners.btc._types import (  # noqa - Ignore access to _module
     S9,
     S17,
     T17,
@@ -143,13 +143,19 @@ class _MinerPhaseBalancer:
 
     async def get_balance_setpoints(self, wattage: int) -> dict:
         # gather data needed to optimize shutdown only miners
-        dp = ["hashrate", "wattage", "wattage_limit"]
+        dp = ["hashrate", "wattage", "wattage_limit", "hashboards"]
         data = await asyncio.gather(
             *[
                 self.miners[miner]["miner"].get_data(data_to_get=dp)
                 for miner in self.miners
             ]
         )
+        pct_ideal_list = [d.percent_ideal for d in data]
+        pct_ideal = 0
+        if len(pct_ideal_list) > 0:
+            pct_ideal = sum(pct_ideal_list) / len(pct_ideal_list)
+
+        wattage = round(wattage * 1 / (pct_ideal / 100))
 
         for data_point in data:
             if (not self.miners[data_point.ip]["tune"]) and (

pyasic/miners/btc/__init__.py

@@ -0,0 +1,19 @@
+# ------------------------------------------------------------------------------
+#  Copyright 2022 Upstream Data Inc                                            -
+#                                                                              -
+#  Licensed under the Apache License, Version 2.0 (the "License");             -
+#  you may not use this file except in compliance with the License.            -
+#  You may obtain a copy of the License at                                     -
+#                                                                              -
+#      http://www.apache.org/licenses/LICENSE-2.0                              -
+#                                                                              -
+#  Unless required by applicable law or agreed to in writing, software         -
+#  distributed under the License is distributed on an "AS IS" BASIS,           -
+#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.    -
+#  See the License for the specific language governing permissions and         -
+#  limitations under the License.                                              -
+# ------------------------------------------------------------------------------
+from .antminer import *
+from .avalonminer import *
+from .innosilicon import *
+from .whatsminer import *

pyasic/miners/btc/_backends/X19.py

@@ -20,7 +20,7 @@ from typing import List, Optional, Union
 from pyasic.API import APIError
 from pyasic.config import MinerConfig, X19PowerMode
 from pyasic.data.error_codes import MinerErrorData, X19Error
-from pyasic.miners._backends import BMMiner  # noqa - Ignore access to _module
+from pyasic.miners.btc._backends import BMMiner  # noqa - Ignore access to _module
 from pyasic.web.X19 import X19WebAPI
 
 

pyasic/miners/btc/_backends/__init__.py

@@ -22,5 +22,3 @@ from .cgminer_avalon import CGMinerAvalon
 from .hiveon import Hiveon
 from .vnish import VNish
 from .X19 import X19
-from .X7 import X7
-from .X15 import X15

pyasic/miners/btc/_backends/cgminer_avalon.py

@@ -22,7 +22,7 @@ from pyasic.config import MinerConfig
 from pyasic.data import Fan, HashBoard
 from pyasic.data.error_codes import MinerErrorData
 from pyasic.errors import APIError
-from pyasic.miners._backends import CGMiner
+from pyasic.miners.btc._backends import CGMiner
 
 
 class CGMinerAvalon(CGMiner):

pyasic/miners/btc/_backends/hiveon.py

@@ -16,7 +16,7 @@
 
 import ipaddress
 
-from pyasic.miners._backends import BMMiner
+from pyasic.miners.btc._backends import BMMiner
 
 
 class Hiveon(BMMiner):

pyasic/miners/btc/_backends/vnish.py

@@ -18,7 +18,7 @@ import logging
 from typing import Optional
 
 from pyasic.errors import APIError
-from pyasic.miners._backends.bmminer import BMMiner
+from pyasic.miners.btc._backends.bmminer import BMMiner
 from pyasic.web.vnish import VNishWebAPI
 
 
@@ -138,6 +138,8 @@ class VNish(BMMiner):
         if web_settings:
             try:
                 wattage_limit = web_settings["miner"]["overclock"]["preset"]
+                if wattage_limit == "disabled":
+                    return None
                 return int(wattage_limit)
             except (KeyError, TypeError):
                 pass

pyasic/miners/btc/_types/antminer/X17/S17.py

@@ -14,7 +14,7 @@
 #  limitations under the License.                                              -
 # ------------------------------------------------------------------------------
 
-from pyasic.miners._types.makes import AntMiner
+from pyasic.miners.makes import AntMiner
 
 
 class S17(AntMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/antminer/X17/S17_Plus.py

@@ -14,7 +14,7 @@
 #  limitations under the License.                                              -
 # ------------------------------------------------------------------------------
 
-from pyasic.miners._types.makes import AntMiner
+from pyasic.miners.makes import AntMiner
 
 
 class S17Plus(AntMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/antminer/X17/S17_Pro.py

@@ -14,7 +14,7 @@
 #  limitations under the License.                                              -
 # ------------------------------------------------------------------------------
 
-from pyasic.miners._types.makes import AntMiner
+from pyasic.miners.makes import AntMiner
 
 
 class S17Pro(AntMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/antminer/X17/S17e.py

@@ -14,7 +14,7 @@
 #  limitations under the License.                                              -
 # ------------------------------------------------------------------------------
 
-from pyasic.miners._types.makes import AntMiner
+from pyasic.miners.makes import AntMiner
 
 
 class S17e(AntMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/antminer/X17/T17.py

@@ -14,7 +14,7 @@
 #  limitations under the License.                                              -
 # ------------------------------------------------------------------------------
 
-from pyasic.miners._types.makes import AntMiner
+from pyasic.miners.makes import AntMiner
 
 
 class T17(AntMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/antminer/X17/T17_Plus.py

@@ -14,7 +14,7 @@
 #  limitations under the License.                                              -
 # ------------------------------------------------------------------------------
 
-from pyasic.miners._types.makes import AntMiner
+from pyasic.miners.makes import AntMiner
 
 
 class T17Plus(AntMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/antminer/X17/T17e.py

@@ -14,7 +14,7 @@
 #  limitations under the License.                                              -
 # ------------------------------------------------------------------------------
 
-from pyasic.miners._types.makes import AntMiner
+from pyasic.miners.makes import AntMiner
 
 
 class T17e(AntMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/antminer/X19/S19.py

@@ -14,7 +14,7 @@
 #  limitations under the License.                                              -
 # ------------------------------------------------------------------------------
 
-from pyasic.miners._types.makes import AntMiner
+from pyasic.miners.makes import AntMiner
 
 
 class S19(AntMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/antminer/X19/S19_Pro.py

@@ -14,7 +14,7 @@
 #  limitations under the License.                                              -
 # ------------------------------------------------------------------------------
 
-from pyasic.miners._types.makes import AntMiner
+from pyasic.miners.makes import AntMiner
 
 
 class S19Pro(AntMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/antminer/X19/S19_XP.py

@@ -14,7 +14,7 @@
 #  limitations under the License.                                              -
 # ------------------------------------------------------------------------------
 
-from pyasic.miners._types.makes import AntMiner
+from pyasic.miners.makes import AntMiner
 
 
 class S19XP(AntMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/antminer/X19/S19a.py

@@ -14,7 +14,7 @@
 #  limitations under the License.                                              -
 # ------------------------------------------------------------------------------
 
-from pyasic.miners._types.makes import AntMiner
+from pyasic.miners.makes import AntMiner
 
 
 class S19a(AntMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/antminer/X19/S19a_Pro.py

@@ -14,7 +14,7 @@
 #  limitations under the License.                                              -
 # ------------------------------------------------------------------------------
 
-from pyasic.miners._types.makes import AntMiner
+from pyasic.miners.makes import AntMiner
 
 
 class S19aPro(AntMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/antminer/X19/S19j.py

@@ -14,7 +14,7 @@
 #  limitations under the License.                                              -
 # ------------------------------------------------------------------------------
 
-from pyasic.miners._types.makes import AntMiner
+from pyasic.miners.makes import AntMiner
 
 
 class S19j(AntMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/antminer/X19/S19j_Pro.py

@@ -14,7 +14,7 @@
 #  limitations under the License.                                              -
 # ------------------------------------------------------------------------------
 
-from pyasic.miners._types.makes import AntMiner
+from pyasic.miners.makes import AntMiner
 
 
 class S19jPro(AntMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/antminer/X19/T19.py

@@ -14,7 +14,7 @@
 #  limitations under the License.                                              -
 # ------------------------------------------------------------------------------
 
-from pyasic.miners._types.makes import AntMiner
+from pyasic.miners.makes import AntMiner
 
 
 class T19(AntMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/antminer/X9/S9.py

@@ -14,7 +14,7 @@
 #  limitations under the License.                                              -
 # ------------------------------------------------------------------------------
 
-from pyasic.miners._types.makes import AntMiner
+from pyasic.miners.makes import AntMiner
 
 
 class S9(AntMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/antminer/X9/S9i.py

@@ -14,7 +14,7 @@
 #  limitations under the License.                                              -
 # ------------------------------------------------------------------------------
 
-from pyasic.miners._types.makes import AntMiner
+from pyasic.miners.makes import AntMiner
 
 
 class S9i(AntMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/antminer/X9/T9.py

@@ -14,7 +14,7 @@
 #  limitations under the License.                                              -
 # ------------------------------------------------------------------------------
 
-from pyasic.miners._types.makes import AntMiner
+from pyasic.miners.makes import AntMiner
 
 
 class T9(AntMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/antminer/__init__.py

@@ -13,7 +13,6 @@
 #  See the License for the specific language governing permissions and         -
 #  limitations under the License.                                              -
 # ------------------------------------------------------------------------------
-from .X7 import *
 from .X9 import *
 from .X17 import *
 from .X19 import *

pyasic/miners/btc/_types/avalonminer/A10X/A1026.py

@@ -14,7 +14,7 @@
 #  limitations under the License.                                              -
 # ------------------------------------------------------------------------------
 
-from pyasic.miners._types.makes import AvalonMiner
+from pyasic.miners.makes import AvalonMiner
 
 
 class Avalon1026(AvalonMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/avalonminer/A10X/A1047.py

@@ -14,7 +14,7 @@
 #  limitations under the License.                                              -
 # ------------------------------------------------------------------------------
 
-from pyasic.miners._types.makes import AvalonMiner
+from pyasic.miners.makes import AvalonMiner
 
 
 class Avalon1047(AvalonMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/avalonminer/A10X/A1066.py

@@ -14,7 +14,7 @@
 #  limitations under the License.                                              -
 # ------------------------------------------------------------------------------
 
-from pyasic.miners._types.makes import AvalonMiner
+from pyasic.miners.makes import AvalonMiner
 
 
 class Avalon1066(AvalonMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/avalonminer/A7X/A721.py

@@ -14,7 +14,7 @@
 #  limitations under the License.                                              -
 # ------------------------------------------------------------------------------
 
-from pyasic.miners._types.makes import AvalonMiner
+from pyasic.miners.makes import AvalonMiner
 
 
 class Avalon721(AvalonMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/avalonminer/A7X/A741.py

@@ -14,7 +14,7 @@
 #  limitations under the License.                                              -
 # ------------------------------------------------------------------------------
 
-from pyasic.miners._types.makes import AvalonMiner
+from pyasic.miners.makes import AvalonMiner
 
 
 class Avalon741(AvalonMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/avalonminer/A7X/A761.py

@@ -14,7 +14,7 @@
 #  limitations under the License.                                              -
 # ------------------------------------------------------------------------------
 
-from pyasic.miners._types.makes import AvalonMiner
+from pyasic.miners.makes import AvalonMiner
 
 
 class Avalon761(AvalonMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/avalonminer/A8X/A821.py

@@ -14,7 +14,7 @@
 #  limitations under the License.                                              -
 # ------------------------------------------------------------------------------
 
-from pyasic.miners._types.makes import AvalonMiner
+from pyasic.miners.makes import AvalonMiner
 
 
 class Avalon821(AvalonMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/avalonminer/A8X/A841.py

@@ -14,7 +14,7 @@
 #  limitations under the License.                                              -
 # ------------------------------------------------------------------------------
 
-from pyasic.miners._types.makes import AvalonMiner
+from pyasic.miners.makes import AvalonMiner
 
 
 class Avalon841(AvalonMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/avalonminer/A8X/A851.py

@@ -14,7 +14,7 @@
 #  limitations under the License.                                              -
 # ------------------------------------------------------------------------------
 
-from pyasic.miners._types.makes import AvalonMiner
+from pyasic.miners.makes import AvalonMiner
 
 
 class Avalon851(AvalonMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/avalonminer/A9X/A921.py

@@ -14,7 +14,7 @@
 #  limitations under the License.                                              -
 # ------------------------------------------------------------------------------
 
-from pyasic.miners._types.makes import AvalonMiner
+from pyasic.miners.makes import AvalonMiner
 
 
 class Avalon921(AvalonMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/innosilicon/T3X/T3H_Plus.py

@@ -14,7 +14,7 @@
 #  limitations under the License.                                              -
 # ------------------------------------------------------------------------------
 
-from pyasic.miners._types.makes import InnosiliconMiner
+from pyasic.miners.makes import InnosiliconMiner
 
 
 class InnosiliconT3HPlus(InnosiliconMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/whatsminer/M2X/M20.py

@@ -14,7 +14,7 @@
 #  limitations under the License.                                              -
 # ------------------------------------------------------------------------------
 
-from pyasic.miners._types.makes import WhatsMiner
+from pyasic.miners.makes import WhatsMiner
 
 
 class M20V10(WhatsMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/whatsminer/M2X/M20S.py

@@ -16,7 +16,7 @@
 
 import warnings
 
-from pyasic.miners._types.makes import WhatsMiner
+from pyasic.miners.makes import WhatsMiner
 
 
 class M20SV10(WhatsMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/whatsminer/M2X/M20S_Plus.py

@@ -16,7 +16,7 @@
 
 import warnings
 
-from pyasic.miners._types.makes import WhatsMiner
+from pyasic.miners.makes import WhatsMiner
 
 
 class M20SPlusV30(WhatsMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/whatsminer/M2X/M21.py

@@ -16,7 +16,7 @@
 
 import warnings
 
-from pyasic.miners._types.makes import WhatsMiner
+from pyasic.miners.makes import WhatsMiner
 
 
 class M21V10(WhatsMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/whatsminer/M2X/M21S.py

@@ -16,7 +16,7 @@
 
 import warnings
 
-from pyasic.miners._types.makes import WhatsMiner
+from pyasic.miners.makes import WhatsMiner
 
 
 class M21SV20(WhatsMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/whatsminer/M2X/M21S_Plus.py

@@ -16,7 +16,7 @@
 
 import warnings
 
-from pyasic.miners._types.makes import WhatsMiner
+from pyasic.miners.makes import WhatsMiner
 
 
 class M21SPlusV20(WhatsMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/whatsminer/M2X/M29.py

@@ -16,7 +16,7 @@
 
 import warnings
 
-from pyasic.miners._types.makes import WhatsMiner
+from pyasic.miners.makes import WhatsMiner
 
 
 class M29V10(WhatsMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/whatsminer/M3X/M30.py

@@ -16,7 +16,7 @@
 
 import warnings
 
-from pyasic.miners._types.makes import WhatsMiner
+from pyasic.miners.makes import WhatsMiner
 
 
 class M30V10(WhatsMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/whatsminer/M3X/M30S.py

@@ -16,7 +16,7 @@
 
 import warnings
 
-from pyasic.miners._types.makes import WhatsMiner
+from pyasic.miners.makes import WhatsMiner
 
 
 class M30SV10(WhatsMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/whatsminer/M3X/M30S_Plus.py

@@ -16,7 +16,7 @@
 
 import warnings
 
-from pyasic.miners._types.makes import WhatsMiner
+from pyasic.miners.makes import WhatsMiner
 
 
 class M30SPlusV10(WhatsMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/whatsminer/M3X/M30S_Plus_Plus.py

@@ -16,7 +16,7 @@
 
 import warnings
 
-from pyasic.miners._types.makes import WhatsMiner
+from pyasic.miners.makes import WhatsMiner
 
 
 class M30SPlusPlusV10(WhatsMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/whatsminer/M3X/M31.py

@@ -16,7 +16,7 @@
 
 import warnings
 
-from pyasic.miners._types.makes import WhatsMiner
+from pyasic.miners.makes import WhatsMiner
 
 
 class M31V10(WhatsMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/whatsminer/M3X/M31H.py

@@ -16,7 +16,7 @@
 
 import warnings
 
-from pyasic.miners._types.makes import WhatsMiner
+from pyasic.miners.makes import WhatsMiner
 
 
 class M31HV40(WhatsMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/whatsminer/M3X/M31S.py

@@ -16,7 +16,7 @@
 
 import warnings
 
-from pyasic.miners._types.makes import WhatsMiner
+from pyasic.miners.makes import WhatsMiner
 
 
 class M31SV10(WhatsMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/whatsminer/M3X/M31SE.py

@@ -16,7 +16,7 @@
 
 import warnings
 
-from pyasic.miners._types.makes import WhatsMiner
+from pyasic.miners.makes import WhatsMiner
 
 
 class M31SEV10(WhatsMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/whatsminer/M3X/M31S_Plus.py

@@ -16,7 +16,7 @@
 
 import warnings
 
-from pyasic.miners._types.makes import WhatsMiner
+from pyasic.miners.makes import WhatsMiner
 
 
 class M31SPlusV10(WhatsMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/whatsminer/M3X/M32.py

@@ -16,7 +16,7 @@
 
 import warnings
 
-from pyasic.miners._types.makes import WhatsMiner
+from pyasic.miners.makes import WhatsMiner
 
 
 class M32V10(WhatsMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/whatsminer/M3X/M32S.py

@@ -14,7 +14,7 @@
 #  limitations under the License.                                              -
 # ------------------------------------------------------------------------------
 
-from pyasic.miners._types.makes import WhatsMiner
+from pyasic.miners.makes import WhatsMiner
 
 
 class M32S(WhatsMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/whatsminer/M3X/M33.py

@@ -16,7 +16,7 @@
 
 import warnings
 
-from pyasic.miners._types.makes import WhatsMiner
+from pyasic.miners.makes import WhatsMiner
 
 
 class M33V10(WhatsMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/whatsminer/M3X/M33S.py

@@ -16,7 +16,7 @@
 
 import warnings
 
-from pyasic.miners._types.makes import WhatsMiner
+from pyasic.miners.makes import WhatsMiner
 
 
 class M33SVG30(WhatsMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/whatsminer/M3X/M33S_Plus.py

@@ -16,7 +16,7 @@
 
 import warnings
 
-from pyasic.miners._types.makes import WhatsMiner
+from pyasic.miners.makes import WhatsMiner
 
 
 class M33SPlusVH20(WhatsMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/whatsminer/M3X/M33S_Plus_Plus.py

@@ -16,7 +16,7 @@
 
 import warnings
 
-from pyasic.miners._types.makes import WhatsMiner
+from pyasic.miners.makes import WhatsMiner
 
 
 class M33SPlusPlusVH20(WhatsMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/whatsminer/M3X/M34S_Plus.py

@@ -14,7 +14,7 @@
 #  limitations under the License.                                              -
 # ------------------------------------------------------------------------------
 
-from pyasic.miners._types.makes import WhatsMiner
+from pyasic.miners.makes import WhatsMiner
 
 
 class M34SPlusVE10(WhatsMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/whatsminer/M3X/M36S.py

@@ -16,7 +16,7 @@
 
 import warnings
 
-from pyasic.miners._types.makes import WhatsMiner
+from pyasic.miners.makes import WhatsMiner
 
 
 class M36SVE10(WhatsMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/whatsminer/M3X/M36S_Plus.py

@@ -16,7 +16,7 @@
 
 import warnings
 
-from pyasic.miners._types.makes import WhatsMiner
+from pyasic.miners.makes import WhatsMiner
 
 
 class M36SPlusVG30(WhatsMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/whatsminer/M3X/M36S_Plus_Plus.py

@@ -16,7 +16,7 @@
 
 import warnings
 
-from pyasic.miners._types.makes import WhatsMiner
+from pyasic.miners.makes import WhatsMiner
 
 
 class M36SPlusPlusVH30(WhatsMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/whatsminer/M3X/M39.py

@@ -16,7 +16,7 @@
 
 import warnings
 
-from pyasic.miners._types.makes import WhatsMiner
+from pyasic.miners.makes import WhatsMiner
 
 
 class M39V20(WhatsMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/whatsminer/M5X/M50.py

@@ -16,7 +16,7 @@
 
 import warnings
 
-from pyasic.miners._types.makes import WhatsMiner
+from pyasic.miners.makes import WhatsMiner
 
 
 class M50VG30(WhatsMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/whatsminer/M5X/M50S.py

@@ -16,7 +16,7 @@
 
 import warnings
 
-from pyasic.miners._types.makes import WhatsMiner
+from pyasic.miners.makes import WhatsMiner
 
 
 class M50SVJ10(WhatsMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/whatsminer/M5X/M50S_Plus.py

@@ -16,7 +16,7 @@
 
 import warnings
 
-from pyasic.miners._types.makes import WhatsMiner
+from pyasic.miners.makes import WhatsMiner
 
 
 class M50SPlusVH30(WhatsMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/whatsminer/M5X/M53.py

@@ -16,7 +16,7 @@
 
 import warnings
 
-from pyasic.miners._types.makes import WhatsMiner
+from pyasic.miners.makes import WhatsMiner
 
 
 class M53VH30(WhatsMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/whatsminer/M5X/M53S.py

@@ -16,7 +16,7 @@
 
 import warnings
 
-from pyasic.miners._types.makes import WhatsMiner
+from pyasic.miners.makes import WhatsMiner
 
 
 class M53SVH30(WhatsMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/whatsminer/M5X/M53S_Plus.py

@@ -16,7 +16,7 @@
 
 import warnings
 
-from pyasic.miners._types.makes import WhatsMiner
+from pyasic.miners.makes import WhatsMiner
 
 
 class M53SPlusVJ30(WhatsMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/whatsminer/M5X/M56.py

@@ -16,7 +16,7 @@
 
 import warnings
 
-from pyasic.miners._types.makes import WhatsMiner
+from pyasic.miners.makes import WhatsMiner
 
 
 class M56VH30(WhatsMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/whatsminer/M5X/M56S.py

@@ -16,7 +16,7 @@
 
 import warnings
 
-from pyasic.miners._types.makes import WhatsMiner
+from pyasic.miners.makes import WhatsMiner
 
 
 class M56SVH30(WhatsMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/whatsminer/M5X/M56S_Plus.py

@@ -16,7 +16,7 @@
 
 import warnings
 
-from pyasic.miners._types.makes import WhatsMiner
+from pyasic.miners.makes import WhatsMiner
 
 
 class M56SPlusVJ30(WhatsMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/_types/whatsminer/M5X/M59.py

@@ -16,7 +16,7 @@
 
 import warnings
 
-from pyasic.miners._types.makes import WhatsMiner
+from pyasic.miners.makes import WhatsMiner
 
 
 class M59VH30(WhatsMiner):  # noqa - ignore ABC method implementation

pyasic/miners/btc/antminer/bmminer/X17/S17.py

@@ -14,7 +14,7 @@
 #  limitations under the License.                                              -
 # ------------------------------------------------------------------------------
 
-from pyasic.miners._types import S17  # noqa - Ignore access to _module
+from pyasic.miners.btc._types import S17  # noqa - Ignore access to _module
 
 from .X17 import BMMinerX17