bump version number

pyasic/data/__init__.py

@@ -32,6 +32,7 @@ class MinerData:
     :param pool_1_user: The first pool user on the miner as a str.
     :param pool_2_url: The second pool url on the miner as a str.
     :param pool_2_user: The second pool user on the miner as a str.
+    :param errors: A list of errors on the miner.
     """
 
     ip: str
@@ -69,6 +70,7 @@ class MinerData:
     pool_1_user: str = "Unknown"
     pool_2_url: str = ""
     pool_2_user: str = ""
+    errors: list = field(default_factory=list)
 
     def __post_init__(self):
         self.datetime = datetime.now()

pyasic/data/error_codes/__init__.py

@@ -0,0 +1,2 @@
+from .whatsminer import WhatsminerError
+from .bos import BraiinsOSError

pyasic/data/error_codes/bos.py

@@ -0,0 +1,11 @@
+from dataclasses import dataclass, asdict
+
+
+@dataclass
+class BraiinsOSError:
+    """A Dataclass to handle error codes of BraiinsOS+ miners."""
+
+    error_message: str
+
+    def asdict(self):
+        return asdict(self)

pyasic/data/error_codes/whatsminer.py

@@ -0,0 +1,152 @@
+from dataclasses import dataclass, field, asdict
+
+
+@dataclass
+class WhatsminerError:
+    """A Dataclass to handle error codes of Whatsminers."""
+
+    error_code: int
+    error_message: str = field(init=False)
+
+    @property
+    def error_message(self):  # noqa - Skip PyCharm inspection
+        if self.error_code in ERROR_CODES:
+            return ERROR_CODES[self.error_code]
+        return "Unknown error type."
+
+    @error_message.setter
+    def error_message(self, val):
+        pass
+
+    def asdict(self):
+        return asdict(self)
+
+
+ERROR_CODES = {
+    110: "Intake fan speed error.",
+    111: "Exhaust fan speed error.",
+    120: "Intake fan speed error.  Fan speed deviates by more than 2000.",
+    121: "Exhaust fan speed error.  Fan speed deviates by more than 2000.",
+    130: "Intake fan speed error.  Fan speed deviates by more than 3000.",
+    131: "Exhaust fan speed error.  Fan speed deviates by more than 3000.",
+    140: "Fan speed too high.",
+    200: "Power probing error.  No power found.",
+    201: "Power supply and configuration file don't match.",
+    202: "Power output voltage error.",
+    203: "Power protecting due to high environment temperature.",
+    204: "Power current protecting due to high environment temperature.",
+    205: "Power current error.",
+    206: "Power input low voltage error.",
+    207: "Power input current protecting due to bad power input.",
+    210: "Power error.",
+    213: "Power input voltage and current do not match power output.",
+    216: "Power remained unchanged for a long time.",
+    217: "Power set enable error.",
+    218: "Power input voltage is lower than 230V for high power mode.",
+    233: "Power output high temperature protection error.",
+    234: "Power output high temperature protection error.",
+    235: "Power output high temperature protection error.",
+    236: "Power output high current protection error.",
+    237: "Power output high current protection error.",
+    238: "Power output high current protection error.",
+    239: "Power output high voltage protection error.",
+    240: "Power output low voltage protection error.",
+    241: "Power output current imbalance error.",
+    243: "Power input high temperature protection error.",
+    244: "Power input high temperature protection error.",
+    245: "Power input high temperature protection error.",
+    246: "Power input high voltage protection error.",
+    247: "Power input high voltage protection error.",
+    248: "Power input high current protection error.",
+    249: "Power input high current protection error.",
+    250: "Power input low voltage protection error.",
+    251: "Power input low voltage protection error.",
+    253: "Power supply fan error.",
+    254: "Power supply fan error.",
+    255: "Power output high power protection error.",
+    256: "Power output high power protection error.",
+    257: "Input over current protection of power supply on primary side.",
+    263: "Power communication warning.",
+    264: "Power communication error.",
+    267: "Power watchdog protection.",
+    268: "Power output high current protection.",
+    269: "Power input high current protection.",
+    270: "Power input high voltage protection.",
+    271: "Power input low voltage protection.",
+    272: "Excessive power supply output warning.",
+    273: "Power input too high warning.",
+    274: "Power fan warning.",
+    275: "Power high temperature warning.",
+    300: "Right board temperature sensor detection error.",
+    301: "Center board temperature sensor detection error.",
+    302: "Left board temperature sensor detection error.",
+    320: "Right board temperature reading error.",
+    321: "Center board temperature reading error.",
+    322: "Left board temperature reading error.",
+    329: "Control board temperature sensor communication error.",
+    350: "Right board temperature protecting.",
+    351: "Center board temperature protecting.",
+    352: "Left board temperature protecting.",
+    360: "Hashboard high temperature error.",
+    410: "Right board eeprom detection error.",
+    411: "Center board eeprom detection error.",
+    412: "Left board eeprom detection error.",
+    420: "Right board eeprom parsing error.",
+    421: "Center board eeprom parsing error.",
+    422: "Left board eeprom parsing error.",
+    430: "Right board chip bin type error.",
+    431: "Center board chip bin type error.",
+    432: "Left board chip bin type error.",
+    440: "Right board eeprom chip number X error.",
+    441: "Center board eeprom chip number X error.",
+    442: "Left board eeprom chip number X error.",
+    450: "Right board eeprom xfer error.",
+    451: "Center board eeprom xfer error.",
+    452: "Left board eeprom xfer error.",
+    510: "Right board miner type error.",
+    511: "Center board miner type error.",
+    512: "Left board miner type error.",
+    520: "Right board bin type error.",
+    521: "Center board bin type error.",
+    522: "Left board bin type error.",
+    530: "Right board not found.",
+    531: "Center board not found.",
+    532: "Left board not found.",
+    540: "Right board error reading chip id.",
+    541: "Center board error reading chip id.",
+    542: "Left board error reading chip id.",
+    550: "Right board has bad chips.",
+    551: "Center board has bad chips.",
+    552: "Left board has bad chips.",
+    560: "Right board loss of balance error.",
+    561: "Center board loss of balance error.",
+    562: "Left board loss of balance error.",
+    600: "Environment temperature is too high.",
+    610: "Environment temperature is too high for high performance mode.",
+    701: "Control board no support chip.",
+    710: "Control board rebooted as an exception.",
+    712: "Control board rebooted as an exception.",
+    800: "CGMiner checksum error.",
+    801: "System monitor checksum error.",
+    802: "Remote daemon checksum error.",
+    2010: "All pools are disabled.",
+    2020: "Pool 0 connection failed.",
+    2021: "Pool 1 connection failed.",
+    2022: "Pool 2 connection failed.",
+    2030: "High rejection rate on pool.",
+    2040: "The pool does not support asicboost mode.",
+    2310: "Hashrate is too low.",
+    2320: "Hashrate is too low.",
+    2340: "Hashrate loss is too high.",
+    2350: "Hashrate loss is too high.",
+    5070: "Right hashboard water velocity is abnormal.",
+    5071: "Center hashboard water velocity is abnormal.",
+    5072: "Left hashboard water velocity is abnormal.",
+    5110: "Right hashboard frequency up timeout.",
+    5111: "Center hashboard frequency up timeout.",
+    5112: "Left hashboard frequency up timeout.",
+    8410: "Software version error.",
+    100001: "/antiv/signature illegal.",
+    100002: "/antiv/dig/init.d illegal.",
+    100003: "/antiv/dig/pf_partial.dig illegal.",
+}

pyasic/miners/_backends/bosminer.py

@@ -9,6 +9,7 @@ from pyasic.miners import BaseMiner
 from pyasic.API.bosminer import BOSMinerAPI
 from pyasic.API import APIError
 
+from pyasic.data.error_codes import BraiinsOSError
 from pyasic.data import MinerData
 
 from pyasic.config import MinerConfig
@@ -297,7 +298,7 @@ class BOSMiner(BaseMiner):
             except APIError as e:
                 if str(e.message) == "Not ready":
                     miner_data = await self.api.multicommand(
-                        "summary", "tunerstatus", "pools", "fans", "devs"
+                        "summary", "tunerstatus", "pools", "devs"
                     )
             if miner_data:
                 break
@@ -395,6 +396,30 @@ class BOSMiner(BaseMiner):
                     if wattage:
                         data.wattage = wattage
 
+                    chain_status = tuner[0].get("TunerChainStatus")
+                    if chain_status and len(chain_status) > 0:
+                        board_map = {
+                            0: "Left board",
+                            1: "Center board",
+                            2: "Right board",
+                        }
+                        offset = (
+                            6
+                            if chain_status[0]["HashchainIndex"] in [6, 7, 8]
+                            else chain_status[0]["HashchainIndex"]
+                        )
+                        for board in chain_status:
+                            _id = board["HashchainIndex"] - offset
+                            if board["Status"] not in [
+                                "Stable",
+                                "Testing performance profile",
+                            ]:
+                                _error = board["Status"]
+                                _error = _error[0].lower() + _error[1:]
+                                data.errors.append(
+                                    BraiinsOSError(f"{board_map[_id]} {_error}")
+                                )
+
         if devdetails:
             boards = devdetails[0].get("DEVDETAILS")
             if boards:
@@ -418,7 +443,7 @@ class BOSMiner(BaseMiner):
                     offset = 6 if boards[0]["ID"] in [6, 7, 8] else boards[0]["ID"]
                     for board in boards:
                         _id = board["ID"] - offset
-                        hashrate = board["MHS 1m"]
+                        hashrate = round(board["MHS 1m"] / 1000000, 2)
                         setattr(data, board_map[_id], hashrate)
         return data
 

pyasic/miners/_backends/btminer.py

@@ -7,6 +7,7 @@ from pyasic.miners import BaseMiner
 from pyasic.API import APIError
 
 from pyasic.data import MinerData
+from pyasic.data.error_codes import WhatsminerError
 
 from pyasic.settings import MINER_FACTORY_GET_VERSION_RETRIES as DATA_RETRIES
 
@@ -170,6 +171,15 @@ class BTMiner(BaseMiner):
 
                     data.wattage_limit = wattage_limit
 
+                    if summary_data[0].get("Error Code Count"):
+                        for i in range(summary_data[0]["Error Code Count"]):
+                            if summary_data[0].get(f"Error Code {i}"):
+                                data.errors.append(
+                                    WhatsminerError(
+                                        error_code=summary_data[0][f"Error Code {i}"]
+                                    )
+                                )
+
         if devs:
             temp_data = devs.get("DEVS")
             if temp_data:

pyproject.toml

@@ -1,6 +1,6 @@
 [tool.poetry]
 name = "pyasic"
-version = "0.10.0"
+version = "0.10.2"
 description = "A set of modules for interfacing with many common types of ASIC bitcoin miners, using both their API and SSH."
 authors = ["UpstreamData <brett@upstreamdata.ca>"]